Program 1:  This feature is commonly referred to as “Extra-Close/Short-Close.”  Occasions will arise where it will be desirable to close and lock your safe, vault or chest for a short period of time during the day.  This feature allows you to add an additional opening time to your existing program without disturbing your existing programming.  Example: The current time is 1:00PM (13:00 military time).  You decide to lock your safe until 4:30PM (16:30 military time).  Insert and rotate the winding key counterclockwise until no resistance is felt.  Wait 5 seconds and begin rotating the winding key clockwise until the LCD displays “Pr 1" (refer to figure E).  Stop rotating the winding key.  When the hour numerals begin to flash, install the next opening hour, which in our example is 16.  After installing the hour, wait for the minute numerals to begin flashing.  Install the actual minutes of the next opening, which in our example is 30.  After you stop rotating the winding key the entire display will flash several times, cease flashing and the unlocking pin will remain in the fully locked position.  Prepare all remaining movements in the same manner.  Your timelock will now open at 16:30 (4:30PM).  This is a one-time program which will not repeat.  

Program 2:  “Skip A Day” - this feature allows you to cancel a scheduled opening.  Example: Monday is a holiday and you want your safe, vault or chest to remain locked rather than open as scheduled Monday morning.  Insert and rotate the winding key counterclockwise until no resistance is noted.  Wait 5 seconds and begin rotating the winding key clockwise until “PR 1" appears.  Continue rotating clockwise, stopping when “PR 2" appears in the display.  Each day of the week that has a scheduled opening time will appear.  The cursor will flash above each day individually.  When the cursor flashes over the day you wish to cancel, rotate the winding key clockwise until the cursor over that day disappears.  You may cancel 6 out of 7 opening times.  After the cursor over the day you chose disappears, stop rotating the winding key.  After the program steps through the remainder of the days, the movement will release to the fully unlocked position.

Program 3:  “Daylight Savings Time” - this feature allows you to adjust “Real-Time” for seasonal changes.  Insert and rotate the winding key counterclockwise until no resistance is noted.  Wait 5 seconds and begin rotating the winding key clockwise.  Scroll through “PR 1 & PR 2" stopping when “PR 3" appears on the display.  The hour numerals will begin to flash.  Adjust the hour reading  up or down by one hour.  Shortly after you stop rotating the winding key, the minute numerals will flash.  Adjust the minute reading in the usual manner.  After you stop rotating the winding key, the display will begin to flash and release the movement to the fully unlocked position.